109mm King Pre-Roll Cone Filling Machine Cartridge | Vibration Table | Stabilization Mat | Fills 315 Cones
Every Starter Kit comes standard with one complete cartridge setup. This includes the cartridge, riser, and tamping tool that will aid in compressing your material during operation.
Our universal vibration table features an industrial quality vibrating device that has been specially configured to efficiently and smoothly shake your material. Our vibrating devices are CNC'ed from high quality stainless steel. Each one is hand-configured and quality control tested to ensure longevity and reliability.
Each vibration table comes with an extension cord with a power switch. The included stabilization mat will prevent the vibration table from "walking away" during operation on hard surfaces.
+ Speed and Efficiency:
Filling pre-roll cones by hand can be a tedious and time-consuming process. With a pre-roll cone filling cartridge, you can quickly and easily fill multiple cones at once, saving you time and effort.
+ Consistency:
Pre-roll cone filling cartridges allow you to consistently fill cones to the same level, ensuring that each cone has the same amount of flower. This is important for those who want to ensure a consistent smoking experience.
+ Reduced Waste:
Using a pre-roll cone filling cartridge can help reduce waste by allowing you to fill cones to the exact level you desire. This is especially useful if you only want to fill a small amount of cones at a time.
+ Portability:
Pre-roll cone filling cartridges are small and lightweight, making them easy to take with you on the go. This is especially useful for those who like to roll their own cones while traveling or at events.
+ Easy to Use:
Pre-roll cone filling cartridges are simple to use and require minimal setup. All you have to do is fill the cartridge with ground flower, attach it to a cone, and squeeze the handle to fill the cone.
+ HOW TO USE THIS FILLING MACHINE CARTRIDGE:
1 Set the riser aside for now.
2 Fill the holes of the cartridge with your cones.
3 Fill the top of the cartridge with your material.
4 Use the included tamping tool to pack your material during operation. PLEASE NOTE: Firmly tamp your material early in the filling process to ensure a firm, crisp, tight pack right near the crutch.
5 Once your cones are nearly full (leave some space at the end to twist)
6 Pick up the cartridge and place the riser underneath the cartridge.
7 Set the cartridge down on top of the riser, and the cones will be pushed up so that they are accessible.
8 Remove each cone and twist the end to finish.
+ CLEANING:
Our filling machines can be cleaned with hot water up to 130º F but will warp over time if used in a dishwasher. We recommend using an isopropyl (rubbing alcohol) and salt mixture, commonly used to remove plant resin and residue. Please do not expose our machines to temperatures over 130º or leave outdoors in direct sunlight.
+ THIS STARTER KIT COMES WITH ONE OF EACH OF THE FOLLOWING:
- Filling Machine Cartridge
- Riser
- Tamping Tool
- Vibration Table
- Stabilization Mat
- Extension Cord with Power Switch
+ HOW TO USE THIS FILLING MACHINE STARTER KIT:
- Set the vibration table on the stabilization mat.
- Plug the vibration table into the switched extension cord.
- Plug the extension cord into a power outlet.
- Place the cartridge on the vibration table; set the riser aside for now.
- Fill the holes of the cartridge with your cones.
- Turn on the vibration table using the switch on the extension cord.
- Fill the top of the cartridge with your material and the vibration action will shake your material into the cones.
- Use the included tamping tool to pack your material during operation. PLEASE NOTE: Firmly tamp your material early in the filling process to ensure a firm, crisp, tight pack right near the crutch.
- Once your cones are nearly full (leave some space at the end to twist), turn the vibration table off.
- Pick up the cartridge and place the riser on the vibration table, underneath the cartridge.
- Set the cartridge down on top of the riser, and the cones will be pushed up so that they are accessible.
- Remove each cone and twist the end to finish.
+ Cleaning:
Our filling machines can be cleaned with hot water up to 130º F but will warp over time if used in a dishwasher. We recommend using an isopropyl (rubbing alcohol) and salt mixture, commonly used to remove plant resin and residue. Please do not expose our machines to temperatures over 130º or leave outdoors in direct sunlight.