112g quarter-pound mylar bags are sized for bulk dry products — hemp flower, dried botanicals, loose leaf herbs, edible gummies sold in larger quantities, mushroom products, and specialty supplements. The 4-ounce format is popular with brands that sell wholesale to retailers or offer bulk options to repeat customers. If you're currently using multiple 28g bags to fulfill bulk orders, consolidating into 112g bags reduces your per-unit packaging cost significantly.

Fill the bag, press out excess air, close the child-resistant zipper fully, then heat seal the top section above the zipper using an impulse sealer or hair straightener on high heat. Hold for two to three seconds and let it cool before handling. The tear notches on each side give your customer a clean opening point when they're ready to use the product. For high-volume operations sealing 112g bags, a commercial impulse sealer starting around $30-$50 is worth the investment — it seals faster and more consistently than a household tool.

When properly sealed — child-resistant zipper fully closed and top heat sealed — our 112g mylar bags provide strong odor containment. The metalized barrier layer limits air exchange in both directions, making them a popular smell proof bag choice for hemp flower brands and botanical companies where odor control during storage and shipping matters. For best results make sure both the zipper and heat seal are fully and cleanly closed.

Our 112g child-resistant mylar bags are designed to meet standard child-resistant packaging requirements used across most state hemp and CBD markets. However, packaging compliance requirements vary by state and product type — it's always your responsibility as the brand to verify your packaging meets the specific regulations in your state before going to market. If you're unsure what your state requires, we're happy to help point you in the right direction. Call or text Zack at 843-457-0226.

Yes. The child-resistant zipper on our quarter-pound mylar bags is built for repeated open-and-close cycles. Once the heat-sealed top is opened using the tear notches, the zipper continues to function normally for ongoing storage. Customers who buy hemp or botanical products in 112g bags frequently reuse them for storage after the original product is finished — which is an added value point worth mentioning in your marketing.

Creative Labz offers wholesale 112g mylar bags for hemp brands, CBD companies, edible businesses, and botanical product lines shipping nationwide. Contact Zack directly at 843-457-0226 or zack@creativelabz843.com for bulk pricing. We work with brands at every stage — from first bulk packaging runs to established operations ordering multiple SKUs at volume. Wholesale quarter-pound child-resistant mylar bags are available for qualifying orders with consistent lead times.

We carry tamper-evident stickers, certification labels, and strain labels sized to complement our 112g mylar bags. Order both together and your quarter-pound hemp or edible packaging arrives retail-ready in one shipment without dealing with multiple suppliers. For fully custom artwork on your 112g bags, reach out about our custom packaging options and we'll walk you through minimums and pricing.

112g mylar bags contain a metalized barrier layer designed for moisture, air, and light protection. Because of this construction, quarter-pound mylar bags behave differently from clear or single-layer plastic under certain imaging equipment. The metalized layer exists for barrier performance purposes only. If you need specific material specs for compliance or shipping purposes, contact us and we'll provide full product details on request.

112g mylar bags are food-safe packaging materials widely used across the edible, supplement, and food industries. For brands packaging larger quantities — bulk gummies, dried botanicals, specialty foods — the quarter-pound format provides the barrier protection needed to maintain freshness without the bulk of rigid containers. When the zipper is closed and top heat sealed, 4-ounce mylar bags maintain consistent internal conditions during storage and shipping.

No. Our quarter-pound mylar bags have a built-in resealable zipper and heat-sealable top — no vacuum sealer needed. Press out excess air, close the zipper, heat seal the top. For most hemp, edible, and botanical packaging applications this is sufficient. Pair with a humidity control pack if your product needs stable moisture levels during long-term storage.

Our 112g mylar bags are designed to be sealed with a heat sealer rather than a vacuum sealer. The built-in zipper and heat-sealable top make vacuum equipment unnecessary. For products that benefit from humidity control, we recommend pairing your bags with a humidity pack rather than vacuum sealing — it maintains the right moisture level without removing all the air. If you have a specific use case that needs vacuum compatibility, call or text Zack at 843-457-0226.

112g mylar bags start as a thin polyester film that gets stretched in multiple directions through a biaxial orientation process — which dramatically increases tear resistance and strength. A metalized layer is then bonded to the film to create the barrier properties that block moisture, air, and light. The finished material is converted into quarter-pound bags with resealable zippers, heat-sealable tops, and tear notches. Our bags are produced to consistent specifications so every order performs the same way.

112g mylar bags are multi-layer materials combining polyester film and a metalized barrier layer, which makes them incompatible with most standard curbside recycling programs. Some specialty facilities accept flexible packaging — check with your local provider. Reusing the bags for storage is the most practical option where dedicated recycling isn't available.

No. Our quarter-pound mylar bags are made from food-grade materials safe for contact with dry goods and widely used across the food, supplement, hemp, and botanical packaging industries. They don't contain BPA or harmful additives when manufactured to industry standards. Use them as intended and they're a safe, non-reactive packaging solution.

Right here. Creative Labz carries both 112g mylar bags and humidity control packs, and we're one of the few suppliers where the bag designs are created in-house. Our bags feature premium finishes including spot UV and foil accents you won't find on generic bulk supplier sites. Order bags and humidity packs together and your quarter-pound packaging arrives ready to use in one shipment.

It depends on your product. For hemp flower, dried botanicals, and other moisture-sensitive goods, pairing a humidity control pack with your 112g mylar bag helps maintain stable internal conditions during storage and shipping. Humidity packs regulate moisture levels without removing air entirely — which is what most shelf-stable products actually need. For products that don't require moisture regulation, properly sealing the zipper and heat-sealing the top is sufficient.

The best quarter-pound mylar bag is the one that fits your product, meets your state's compliance requirements, and looks professional enough that your customer picks it up. At Creative Labz every design is created in-house — better quality control, better print finishes, and designs that stand out in a retail environment. Browse our 112g collection to find your fit, or call Zack at 843-457-0226 for a recommendation.

We carry both — and they're designed to work together. Browse our 112g mylar bag catalog, then add matching tamper-evident stickers, certification labels, or holographic seals from our labeling section. Anti-counterfeit QR code labels are also available for brands that want extra protection. Everything ships together so your complete quarter-pound packaging setup arrives in one order.